Hamilton Interior Strip-Outs
Clean, controlled strip-outs for offices, shops, kitchens and bathrooms.
07 8087 881Interior Strip-Out Contractors In Hamilton
When a building's shell is staying but everything inside has to go, you need a crew that can remove the old fit-out without damaging the structure, services or neighbouring tenancies. Hamilton Demolition carries out interior strip-outs across Hamilton and the wider Waikato, from single bathrooms in family homes to full floors of office space in the CBD. We work methodically from the top down, separating materials as we go so the site is left clean, safe and ready for your builder or shopfitter.
Commercial landlords, property managers and renovating homeowners use us because we plan around their programme. That can mean after-hours work in occupied buildings, dust screening, protected access routes and careful isolation of power, water and gas before anything comes out. Where older linings, vinyl or textured ceilings are involved, we test first and can handle asbestos removal in-house, so there are no hold-ups waiting on a second contractor. You get one team, one point of contact and a site that is handed over on time.
Free estimate
What Our Strip-Out Service Covers
Every strip-out is different, so we tailor the scope to what is staying and what is going. Whether you need a light soft strip ahead of a refurbishment or a full back-to-frame removal, we manage the labour, bins, recycling and safety planning, leaving a clear, swept space that your next trade can start on straight away.
Commercial Fit-Out Removal
We remove partition walls, suspended ceilings, carpet, shop fittings, counters and signage from offices and retail tenancies. Work is sequenced to suit lease end dates and make-good obligations, and we can return a tenancy to base build condition so landlords can relet quickly and tenants can recover their bond without disputes.
Soft Strip Demolition
Before a full building demolition or major refurbishment, a soft strip clears out non-structural items such as joinery, linings, insulation, doors, fixtures and floor coverings. Removing these first improves recycling rates, reduces mixed waste and gives engineers and builders a clear view of the structure they are working with.
Kitchen Strip-Outs
We take out cabinetry, benchtops, appliances, splashbacks, tiles and flooring so your kitchen renovation can start on a clean slate. Plumbing and electrical points are capped or made safe by qualified trades, and we protect adjoining floors and walls so only the areas being replaced are affected by the work.
Bathroom Demolition
Bathroom strip-outs often involve tiled walls, old showers, baths, vanities and wet-area linings that need careful removal. We work in tight spaces with minimal disruption, check for moisture damage or rot once linings are off, and can remove subfloor sections when your builder needs to replace them.
Office Strip-Outs
For office floors we remove workstations, data cabling, ceiling tiles, partitions and floor coverings, often after hours so neighbouring tenants can keep working. We coordinate with building managers on lift bookings, fire alarm isolations and loading zones, keeping common areas clean and access routes protected throughout the job.
Waste Sorting & Recycling
Metals, timber, plasterboard, glass and concrete are separated on site wherever practical, then sent to recyclers or approved disposal facilities around the Waikato. Sorting as we strip reduces landfill costs for you, and we can provide disposal records when your project or tenant has sustainability or reporting requirements.
Flooring And Adhesive Removal
Old carpet, vinyl, ceramic tiles and timber overlays are lifted and removed, along with the underlay, gripper strips and stubborn adhesive left behind. We scrape or grind concrete floors back to a clean, flat surface so your flooring installer can lay new coverings without extra preparation, and we control dust with extraction as we go.
Salvage And Reuse
Not everything coming out of a building has to be waste. Doors, joinery, light fittings, workstations and shop fixtures in good condition can be removed carefully and set aside for you to reuse, sell or donate. Telling us what you want to keep before we start means those items come out intact rather than broken.