Pool Surrounds Hamilton
Safe, non-slip concrete surrounds that drain well and frame your pool.
07 8087 881Concrete Pool Surround Contractors In Hamilton
A pool surround has to handle wet feet, pool chemicals, summer heat and constant foot traffic, all while looking good. Hamilton Demolition builds concrete pool surrounds for new and existing pools across Hamilton and the Waikato. We prepare the ground around the pool shell, pour concrete with falls that carry splash water away from the pool and the house, and finish the surface for grip. The result is a safe, practical area for swimming, lounging and entertaining.
We work with pool builders, landscapers and homeowners, fitting our work around the pool installation schedule. Because we also carry out excavation and earthworks, we can help with the ground preparation for a new pool, or remove old pavers, decking or cracked concrete from an existing one. We can pour footings for pool fencing at the same time, so your surround and barrier work together and you're ready for the fence installer.
Free estimate
What Our Pool Surround Work Includes
Good pool surrounds combine safety, drainage and a finish that suits your outdoor space. Our work covers ground preparation, levels and falls, reinforcing, pouring and surface treatment, plus the footings and drainage details that are easy to overlook. We plan each surround around your pool shell, fence line and garden so everything fits together neatly.
Non-Slip Surface Finishes
Wet concrete around a pool needs to grip underfoot. We offer broom and exposed aggregate finishes, and can discuss textured or sealed options that improve slip resistance. Finishes are chosen with bare feet in mind, so the surface is safe without being rough or uncomfortable to walk on.
Falls And Surface Drainage
Splash water, rain and pool backwash should run away from the pool edge and the house. We set consistent falls across the surround toward garden areas, channel drains or sumps, so water does not pond, wash dirt into the pool or soak into the ground next to your foundations.
Pool Fence Footings
Pool barriers must be solidly fixed to meet safety requirements. We can pour footings or set fixing points for glass, aluminium or timber pool fencing as part of the surround, positioned to your fence supplier's layout so posts and spigots go in straight, strong and at the right spacing.
Coping And Edge Details
The edge where the surround meets the pool shell needs careful detailing. We work with your pool builder on bond beam levels, coping and expansion joints, so the surround and pool can move independently without cracking, and the finished edge sits neatly and safely at the waterline.
Ground Preparation And Base
Ground around a pool is often disturbed during installation and can settle if it is not rebuilt properly. We remove soft material, place and compact hardfill in layers, and check levels before pouring, reducing the risk of cracking or sinking once the surround is in use.
Old Surround Replacement
Tired pavers, rotting decking or cracked concrete around an older pool can be removed and replaced with a new concrete surround. We break out and dispose of the old material, protect the pool shell and plumbing during the work, and rebuild the base before pouring the new surface.
Protecting The Pool During Works
Concrete work next to a finished pool needs care. We cover the pool and protect tiles, coping, equipment and liners from slurry, splatter and dust, and stop wash-down water running into it. Cleaning up as we go means your pool is not left with stained surfaces or blocked filters after the job.
Outdoor Living Extensions
Many surrounds are designed to connect with wider outdoor areas. We can extend the concrete to form patios, outdoor kitchen bases, pathways to the house and pads for pool sheds or pump equipment, so the whole area is built at consistent levels and finishes and feels like one well-planned space.